60
To set the caller ID of the location you will be calling in from:
•
Press
Transfer
and then dial
126
.
•
Dial your station passcode.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up [+]
or
Down [-]
keys to select a port and press the right soft key
to confirm).
•
Press
Right
soft key, then
Volume Up [+]
key, then press
Right
soft button
again.
•
Dial the phone number you will be calling in from.
•
Press
Transfer
to store your selection and exit programming.
To turn a MOBEX port ON or OFF:
•
Press
Transfer
and then dial
126
.
•
Dial your station passcode.
•
Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up [+]
or
Down [-]
keys to select a port and press the right soft key
to confirm).
•
Press
Right
soft button to move the cursor down.
•
At
TEL
, dial
2
on dial pad to advance to
DEACT
.
•
Dial
1
to set to
Yes
.
•
Press
Transfer
to store your selection and exit programming.
smt-i3105_combined_user_guide.qxp 4/26/2010 2:12 PM Page 60
61
DISPLAY FEATURES
DIRECTORY INFORMATION
An 11 character directory name can be assigned to each extension number.
Display keyset users can view the name of the called or calling station before an-
swering.
Each outside line can have an 11 character directory name. Incoming calls can be
easily identified and answered with different greetings.
Outside and internal calls ringing to a station group will display [CALL FOR xxx]
where xxx is the station group number. This allows you to answer calls directed to
you differently than calls directed to your group.
DISPLAY NUMBER DIALED
Display keysets begin showing digits as they are dialed. They will stay in the dis-
play until the call duration timer comes on automatically or the
Timer
button is
pressed. If the call duration timer is not used, the number dialed will be displayed
until the call is released, transferred or put on hold.
CALL DURATION TIMER
The system can be set to automatically time outside calls. A few seconds after you
dial a telephone number, the timer appears in the display. It appears immediately
for incoming calls. The call timer continues for the duration of the call. Call dura-
tion times are displayed in minutes and seconds. If a call lasts longer than 60 min-
utes, the timer restarts.
You can press the
Timer
button to manually begin timing a call. Press it again to
stop timing. If you press it while the automatic timer is on, the call duration time is
restarted.
AUTO TIMER
Display keyset users may have the timer automatically start when they answer
incoming calls or after a short delay on an outgoing call.
•
With the handset on-hook, press
Transfer
and then dial
119
.
•
Dial
41
to turn the auto timer on or
40
to turn it off.
•
Press
Transfer
to store your selection.
smt-i3105_combined_user_guide.qxp 4/26/2010 2:12 PM Page 61
