• If mounted on a wall, it should be located at a
height greater than the height of any door or window
but still be at least 5.9 inches from the ceiling.
If locating the ADT Carbon Monoxide Alarm in a room
with a fuel burning appliance:
• If mounted on the ceiling, it should be at least
12 inches from any wall or light fitting.
• The alarm should be a horizontal distance of
between 3.28 and 9.84 feet from the potential
carbon monoxide source.
• In rooms with sloped ceilings, the alarm should be
located on the high side of the room.
• Near paint, thinners, solvent fumes, or air fresheners.
• Where dirt or dust could block the detector.
• In a bathroom or other areas where it may be exposed
to water splashes, dripping or condensation, e.g.
above an electric kettle.
• Where it would be obstructed, e.g. by curtains or
furniture.
• In an area where the temperature could be below
-50°F or above 104°F.
• Where it could be easily knocked or damaged, or
accidentally turned off or removed.
• Over heat sources such as radiators or hot air vents.
Placement
Содержание SmartThings ADT Carbon Monoxide Alarm
Страница 18: ...Reset Button Troubleshooting Wh dan ligh carb Al Po Fa The diff tim turn F ...
Страница 25: ...Replace batteries No action Replace unit with same brand Replace unit with same brand What To Do Use ...
Страница 30: ......
Страница 31: ......