Install the mounting base using the two screws
and anchors provided.
Mounting
Fit the alarm inside the base by aligning it over the
base, then turn the alarm in a clockwise direction
until it clicks into place. The three LEDs will flash
while the alarm powers up.
Test the alarm after completing the installation.
2.
3.
ALARM
CARBON
MONOXIDE
ALARM
FAULT
POWER
Mounting
Содержание SmartThings ADT Carbon Monoxide Alarm
Страница 18: ...Reset Button Troubleshooting Wh dan ligh carb Al Po Fa The diff tim turn F ...
Страница 25: ...Replace batteries No action Replace unit with same brand Replace unit with same brand What To Do Use ...
Страница 30: ......
Страница 31: ......