Health and Safety
207
When using the wireless charger, do not place foreign materials, such as metal objects,
magnets, and magnetic stripe cards, between the device and the wireless charger
The device may not charge properly or may overheat.
Do not bite or suck the device or the battery
•
Doing so may damage the device or result in an explosion or fire.
•
Children or animals can choke on small parts.
•
If children use the device, make sure that they use the device properly.
Do not insert the device or supplied accessories into the eyes, ears, or mouth
Doing so may cause suffocation or serious injuries.
Do not handle a damaged or leaking Lithium Ion (Li-Ion) battery
For safe disposal of your Li-Ion battery, contact your nearest authorized service centre.
Caution
: Failure to comply with safety cautions and
regulations can cause injury or property damage
Do not use your device near other electronic devices
•
Most electronic devices use radio frequency signals. Your device may interfere with
other electronic devices.
•
Using an LTE data connection may cause interference with other devices, such as
audio equipment and telephones.
Do not use your device in a hospital, on an aircraft, or in automotive equipment that can
be interfered with by radio frequency
•
Avoid using your device within a 15 cm range of a pacemaker, if possible, as your
device can interfere with the pacemaker.
•
To minimize possible interference with a pacemaker, use your device only on the side
of your body that is opposite the pacemaker.
•
If you use medical equipment, contact the equipment manufacturer before using
your device to determine whether or not the equipment will be affected by radio
frequencies emitted by the device.
•
On an aircraft, using electronic devices can interfere with the aircraft’s electronic
navigational instruments. Make sure the device is turned off during takeoff and
landing. After takeoff, you can use the device in flight mode if allowed by aircraft
personnel.
•
Electronic devices in your car may malfunction, due to radio interference from your
device. Contact the manufacturer for more information.
