English
_7
Put the cover as original.
Adjusting the optical axis
Connect both transmitter and receiver and turn them on.
Look through the mirror of the sight and adjust the sensor so that the other
sensor can be positioned in the center of the mirror.
You can use the left/right adjustable screw and the vertical adjustable screw
of the refl ector to refi ne your adjustment. (vertically ±10˚ & horizontally ±90˚)
Check the level of the light received from the monitor output signal.
You can use the tester to measure the DC voltage and refi ne your adjustment.
Check the output voltage of the tester and close the cover.
Output Voltage
Optical Axis Status
3.0V or higher
Good
2.9V or lower
To be adjusted
3.
1.
2.
3.
4.
±10˚
±90˚
