appendix _
47
09
A
PP
EN
D
IX
When the address type is S1 DDNS
When a DVR is selected
4. Input the values for each address type.
5. Enter the user ID and password and click
Register
.
If
Cancel
is selected, the values return to the
original settings.
When the MAC address needs to be input
depending on the firmware version, the MAC
address is required to be input.
When the configuration completes, the registered device
is displayed on the physical view tree.
If any registration problem occurs, it is displayed on
the reply message box. The possible errors are like the
following:
Reply message
Comments
Unused Device
It is a unknown device.
Parameter Error
The registered parameters
are wrong.
Disconnected
The device is disconnected.
Not Connected
The device is not listed on the
network.
Network Error
The network is not in good
status.
Wrong Address
The device has a wrong
address.
Wrong User ID
The input user ID is wrong.
Wrong Password
The input password is wrong.
Log-In Fail
The log-on operation has
failed.
Access Conflicted
Access conflict has
happened.
Exceed the Fixed
Number of People
Accessed users are out of
limit.
Authority Error
User authorization has failed.
Can’t Receive Device’s
Response
The system cannot receive
responses from the device.
MAC Address
Conflicted
Duplicate MAC addresses
exist.
IP Address Conflicted
Duplicate IPs exist.
Unknown Error
A unknown error has
occurred.
SHR-5042_Eng.indb 47
2007-06-08 ｿﾀﾈﾄ 1:25:18
