Samsung SHR-4040P, Руководство пользователя

Страница: 23 / 75

3
Recording Setup
4-4
DIGITAL IMAGE RECORDER
2
Channel Setup
4-3
Here comes the initial setup status of the CHANNEL SETUP menu.
① CAMERA Setup
Sets up ON/OFF of a certain channel during display and recording. [ON/OFF]
➁ AUDIO Setup
Sets up ON/OFF of audio input by channels. [ON/OFF]
➂ TITLE
Sets up the title by channels seen during display
It is set to CAM1, CAM2, CAM3, or CAM4 as a default value.
➃
AUDIO RECORD
If you want to record both video and audio data, set it to ON and if you want to
record video 3-11 data only, set it to OFF. Audio data will be recorded at the speed
of 24 Kbps all the time without regard to the video recording field rate. [ON/OFF]
➄ AUDIO OUT
Sets up audio output.
[ON/OFF]
Caution
Caution
Audio data recording will not begin until video recording speed reaches 12.5 IPS
Here comes the initial setup status of the RECORD MODE SETUP menu.
① RECORD/PALYBACK MODE
SHR-4040P can record 25 cuts of video image a second in the SIMPLEX mode.
But, in the SIMPLEX mode, it can perform only one function of recording or replay.
SHR-4040P can perform both recording and replay function in the DUPLEX mode
while it can record only 12.5 cuts of video image a second in this mode.
[SIMPLEX/DUPLEX]
➁ DISK END MODE
- If you set it to STOP, the system will stop recording when the HDD is full.
- If you set it to CONTINUE, the system will overwrite the previous data from the
oldest part during recording. [CONTINUE/STOP]
➂
DISK END BUZZER
At the time of setting up STOP in the DISK END MODE, DISK END BUZZER
determines whether the buzzer sounds or not when the HDD is full.
If it is set to ON, the buzzer will sound when the HDD is full during recording and if
it sets to OFF, the buzzer will remain silent. [ON/OFF]
➃ TIMER RECORD SETUP
At the time of setting up TIMER RECORD, the following screen pops up.
DAY : Sets up the timer record for each weekday or programmed weekday.
[ALL, SUN, MON, TUE, WED, THU, FRI, SAT, SUN, M-F, M-S, OFF]
START : Sets up the recording start time.
END : Sets up the recording end time.
CHANNEL SETUP
CH CAMERA AUDIO TITLE
1 ON ON CAM1
2 ON ON CAM2
3 ON ON CAM3
4 ON ON CAM4
AUDIO RECORD OFF
AUDIO OUT ON
œ❷➛❿
:MOVE :SELECT MENU:EXIT
RECORD MODE SETUP
RECORD/PLAYBACK MODE SIMPLEX
DISK END MODE STOP
DISK END BUZZER OFF
TIMER RECORD SETUP
NOMAL RECORD SETUP
EVENT REC DURATION
10 SEC
EVENT PIC. QUALTY STANDARD
EVENT PIC. RATE 25.0 IPS
œ❷
:MOVE :SELECT MENU:EXIT
TIMER RECORD SETUP
DAY START END
ALL 09:00 17:00
M-F 08:00 18:00
M-S 08:30 18:30
OFF --:-- --:--
OFF --:-- --:--
OFF --:-- --:--
OFF --:-- --:--
OFF --:-- --:--
œ❷➛❿
:MOVE :SELECT MENU:EXIT
SHR-4040P/ENG-1 7/24/03 10:28 AM Page 4-3