Samsung SHN-WDD510 Скачать руководство пользователя

Страница: 21 / 32

Smart

Door Lock

SHN-WDD510

When the lock doesn’t function correctly, please check the items below.
If you can’t resolve the problem, please contact the nearest service center.

Problem

Resolution

Reference

There is no power.

●  Check if the batteries are inserted in the correct polarity.
●  Check that the batteries have a full charge.
●  Check that the Exterior Unit cable has not come loose.

I can’t change the

Master PIN Code.

● There was a delay while changing the PIN Code. The

touchscreen must be illuminated when changing the PIN

Code. Also, after entering the first digit, the next digit must

be entered within 20 seconds.

● Replace the batteries if they are discharged.
● Refer to the ‘Changing the Master PIN Code’ section in

the user manual and try again. Ensure that the Master

PIN Code is 4~10 digits long.

Page 14

I can’t register the

User PIN Code.

● The User Number has already been used. Delete the de

sired User Number and re-register.

● Ensure that the User PIN Code is 4~10 digits long.

Page 15

I can’t register the

User Card.

● The User Number has already been used. Delete the de

sired User Number and re-register.

● Ensure that the card is touched to the card reader within

20 seconds of entering the User Number.

Page 15

I entered the PIN

Code and pressed

the [ ] button,

but the door won’t

open.

● Check that the registered PIN Code was entered cor

rectly.

● If the touchscreen illumination turns off while entering the

PIN Code, the button input was not registered. Touch the

[Touchscreen]

to illuminate the touchscreen and enter

the PIN Code again from the beginning. (The touchscreen

illumination is turned off automatically if there is no input

within 5 seconds.)

Page 18

I can’t unlock the

door with my Card.

● The Card is either unregistered or unrecognized.
● The Card must touch the Card reader correctly.

Page 18

My PIN Code or

Card is authenti-

cated, but the door

won’t open.

The lock may be malfunctioning. Please contact service

center.

Troubleshooting

Содержание SHN-WDD510

































Результаты поиска

Содержание SHN-WDD510

Отзывы:

Похожие инструкции для SHN-WDD510

Бренды по названию

Популярные бренды

Samsung SHN-WDD510, Руководство пользователя

Результаты поиска

Содержание SHN-WDD510

Отзывы:

Похожие инструкции для SHN-WDD510

Бренды по названию

Популярные бренды