SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
11-5
This Document can not be used without Samsung's authorization
1) PLEASE MAKE SURE THAT THE F-PCB IS LOCATED IN THE
MIDDLE OF SLOT.(OTHERWISE F-PCB WILL BE DAMAGED.)
1) WHEN YOU ASSEMBLE,BE CAREFUL NOT TO DESTROY THE
SHIELD GASKET.
2) USE AN AIR GUN NOT TO LEAVE ANY PARTICLE ON LCD
CONNECTOR.
1) WHEN LCD CONNECTOR IS ASSEMBLED, CHECK IT OUT
THERE IS "TICK' SOUND.
2) WHEN YOU DRIVE SCREWS, TAKE CARE NOT TO TOUCH THE
COMPONENTS.
5
6
7
8
1) SLIDE UP SLIGHTLY.
2) DRIVE SCREWS AT 2 POINT.
1) ATTACH CONDUCTION GASKET.
2) INSERT CORRECTLY KEY PAD.
1) DRIVE SCREWS AT 4 POINT.
1)
ATTACH MAIN PBA.
1. AT FIRST, ATTACH MAIN CAMERA.
2. TURN 180°THE EARJACK THEN INSERT IT.
2) ASSEMBLE KEY CONNECTOR.
3) DRIVE SCREWS AT 1 POINT.