Samsung SDS SHS-3320 Скачать руководство пользователя страница 20

Страница: 20 / 36

Samsung SDS

Digital Door Lock

SHS-3320/3321

When the lock doesn’t function correctly, please check the items below.
If you can’t resolve the problem, please contact the nearest service center.

Problem

Resolution

Reference

There is no power.

●  Check if the batteries are inserted in the correct polarity.
●  Check that the batteries have a full charge.
●  Check that the Exterior Unit cable has not come loose.

I can’t change the

Master PIN Code.

● There was a delay while changing the PIN Code. The

touchscreen must be illuminated when changing the PIN

Code. Also, after entering the first digit, the next digit must

be entered within 10 seconds.

● Replace the batteries if they are discharged.
● Refer to the ‘Changing the Master PIN Code’ section in

the user manual and try again. Ensure that the Master

PIN Code is 4~12 digits long.

Page 16

I can’t register the

User PIN Code.

● The User Number has already been used. Delete the de

sired User Number and re-register.

● Ensure that the User PIN Code is 4~12 digits long.

Page 16

I can’t register the

User Card.

● The User Number has already been used. Delete the de

sired User Number and re-register.

● Ensure that the card is touched to the card reader within

10 seconds of entering the User Number.

Page 17

I entered the PIN

Code and pressed

the [ ] button,

but the door won’t

open.

● Check that the registered PIN Code was entered cor

rectly.

● If the touchscreen illumination turns off while entering the

PIN Code, the button input was not registered. Touch the

[Touchscreen]

to illuminate the touchscreen and enter

the PIN Code again from the beginning. (The touchscreen

illumination is turned off automatically if there is no input

within 5 seconds.)

Page 16

I can’t unlock the

door with my Card.

● The Card is either unregistered or unrecognized.
● The Card must touch the Card reader correctly.

Page 17

I can’t unlock the

door with my PIN

Code or Card.

Check if the Double-locking function has been enabled.

When this function is enabled, the lock will not open with

a PIN Code or Card.Touch the

[Touchscreen]

when the

Double-locking function is enabled causes the lock to emit a

‘Too~~t, too~~t’ sound.

Page 18

Troubleshooting

Содержание SDS SHS-3320





































Результаты поиска

Содержание SDS SHS-3320

Отзывы:

Похожие инструкции для SDS SHS-3320

Бренды по названию

Популярные бренды

Samsung SDS SHS-3320, Руководство пользователя

Результаты поиска

Содержание SDS SHS-3320

Отзывы:

Похожие инструкции для SDS SHS-3320

Бренды по названию

Популярные бренды