Samsung SDE-500X, Руководство пользователя

Страница: 26 / 152

26_ connecting with other device
connecting with other device
RJ-45 Cable (Length: 18.3m, 60ft)
This cable is specific to UTP connection, which is not compliant with the LAN cable. You can use the UTP
direct cable (all of 8 pins are used) to extend the length to a max of 200m. (based on UTP CAT 5e)
CVBS+
N.C
CVBS-
N.C
GND 12V
N.C
N.C
<Cable pin information provided>
Name
1 CVBS+
2 CVBS-
3 AUDIO
4 GND
5 12V
6 N.C
7 N.C
8 N.C
Camera Cable
CONNECTING THE CAMERA (SEB-1020R)
Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime.
The camera is suitable for both internal and external use.

Please make sure not to fully expose the camera to rain. The camera must be installed under a shelter to avoid exposure to excessive rain
or moisture.
Name Description
IR LED These infrared LED’s are controlled by the illumination sensor.
b
Lens Focal length of 3.6mm enables you to cover relatively longer range of monitoring.
c
Illumination Sensor Detects incoming light to control the IR LED.
Camera Fitting
Groove Groove that is used to fit the camera bracket.
There are two grooves; one on the top and one on the bottom.
BNC Cable BNC terminal for video signal output.
Power Cable Used to plug the power cable.
b
c