Samsung SCX-6220, Руководство пользователя

Страница: 218 / 330

D.9
D
I
NSTALLING
O
PTIONS
Resetting the Network Interface Card
When your network interface card does not work properly, you
need to reboot the card.
1
Press Menu until “Sys. Admin Tools” appears.
2
Press the scroll buttons until “Network Setup” appears on
the bottom line of the display then press Enter.
3
Press the scroll buttons until “Reset NIC” appears and press
Enter.
4
Press the scroll buttons to select “Yes” and press Enter.
To cancel restoring, select “No.”
5
To return to Standby mode, press Stop/Clear.
Configuring Network
Configuring TCP/IP
Your printer can be set up on a variety of TCP/IP networks. There
are two ways that your printer can be assigned a TCP/IP
address, depending on your network:
• Static Addressing: TCP/IP address is assigned manually by
the system administrator.
• Dynamic Addressing BOOTP/DHCP (default): TCP/IP address
is assigned automatically by the server.
Static Addressing
To enter the TCP/IP address from your printer’s control panel,
take the following steps:
1
Press Menu until “Sys. Admin Tools” appears.
2
Press the scroll buttons until “Network Setup” appears on
the bottom line of the display then press Enter.
3
Press the scroll buttons until “Config Network” appears and
press Enter.
Use the scroll buttons until “TCP/IP” displays on the bottom
line and press Enter to access the menu.