Alignment & Troubleshooting
Service Manual
4-10
Samsung Electronics
In exit area
1. Open and close the front cover. The jammed
paper is automatically ejected from the machine.
2. Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is
any resistance when you pull, stop and go to the
next step.
3. Open the rear cover.
4. If you see the jammed paper, push the pressure
lever on each side up and remove the paper.
Skip to step 9.
If you still do not see the paper, go to the next
step.
5. Release the white strip, the rear cover stopper,
and fully open the rear cover, as shown.
6. Unfold the duplex guide fully.
7. While pushing the fuser lever to the right, open
the fuser door.
