2. Product specification and description
2.2.6. Engine F/W Control Algorithm
2.2.6.1. Feeding
If feeding from a cassette, the drive of the pickup roller is controlled by controlling the solenoid. The on/off of the
solenoid is controlled by controlling the general output port or the external output port. While paper moves, occurrence
of Jam is judged as below.
Item
Description
JAM 0
•
After picking up, paper does not reach the Feed Sensor within a predetermined time.
•
After picking up, if the feed sensor is not on, re-pick up will be initiated. . After re-picking up, if the
feed sensor is not on after certain time, it is JAM 0.
•
Even though the paper reaches to the feed sensor, the feed sensor does not detect the lead edge of
the paper.
JAM 1
•
After the leading edge of the paper passes the feed sensor, the trailing edge of the paper does not clear
the sensor after predetermined period of time.
•
After the leading edge of the paper passes the feed sensor, the paper cannot reach the exit sensor
after predetermined period of time.
* The paper exists between the feed sensor and the exit sensor.
JAM 2
The trailing edge of the paper does not clear the exit sensor within a predetermined
2.2.6.2. Transfer
The charging voltage, developing voltage and the transfer voltage are controlled by PWM (Pulse Width Modulation). The
each output voltage is changeable due to the PWM duty. The transfer voltage admitted when the paper passes the transfer
roller is decided by environment conditions. The resistance value of the transfer roller is changed due to the surrounding
environment or the environment of the set, and the voltage value, which changes due to the environment, is changed through
the AD converter. The voltage value for impressing to the transfer roller is decided by the changed value.
2-31
Copyright© 1995-2012 SAMSUNG. All rights reserved.
