8
.6
<Maintenance>
4
Take a new toner cartridge out of its package.
Caution
• Don't use sharp objects, such as a knife or scissors, to open
the toner cartridge package. You could damage the surface of
the toner cartridge.
• To prevent damage, do not expose the toner cartridge to light
for more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
5
Holding side edges of the toner cartridge, thoroughly rock it from
side to side to redistribute the toner.
6
Place the toner cartridge on a flat surface, as shown, and remove
the paper covering the toner cartridge.
Caution
• Do not touch the green surface, the OPC drum or the front of
each toner cartridge, with your hands or any other material.
Use the handle on each cartridge in order to avoid touching
this area.
• If you leave the top cover open for more than a few minutes,
the OPC drum can be exposed to light. This will cause
damage to the OPC drum. Close the top cover should the
installation need to be halted for any reason.
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash it in cold water. Hot water sets toner into fabric.
7
Insert the cartridge into place.
8
Hold the top cover and close it slowly and carefully, until the cover is
the cover is securely latched.
Содержание SCX-4500 Series
