Using Your Device 13
Cluster Mode Page
The Network Extender for Business solution is a self install and self configuring system. However, there might be a situation in which the configuration should be modified. The Cluster Mode Page allows
you to configure the cluster configuration. There are three choices (Standalone, Ingress and Non-Ingress). Standalone is used for a single unit at a physical site. The Cluster Mode Page allows you to
configure the cluster configuration by selecting the Ingress Unit. In general configure the unit as Ingress when the unit is providing coverage for the entrance of a site (e.g. a lobby). Non-Ingress is used for
the remaining units in the cluster. There are three modes.
Note:
Use caution when modifying the Cluster Mode parameter. When changing the mode from Ingress to Non-Ingress impacts all units in the cluster.
If a single unit is deployed at a site, the system will automatically select Standalone mode.
Note:
Standalone units cannot have their modes modified.
If there is more than one unit at the site then the system will automatically assign the first unit that comes in service to be the Ingress cluster member as shown above.
The other units of the cluster will be automatically assigned to be Non-Ingress members of the cluster.
