| 26
RADVISION | RADVISION Port Security Reference Guide
SCOPIA XT Desktop Server
Table 1-17
lists ports that need to be open on SCOPIA XT Desktop Server.
Table 1-18
lists the ports on the SCOPIA Desktop XT Server when connected to the public internet.
Table 1-17
Ports supported by SCOPIA Desktop XT Server and Internal Network
Port Range
Protocol
Direction
Severity
Functionality
80
TCP
Incoming
Optional
GUI—The alternative is to configure the GUI to run on port
443.
443
TCP
Incoming
Mandatory
Control connection between the
SCOPIA XT Desktop
Client
and the
SCOPIA XT Desktop
Server.
3336, 3337
TCP
Outgoing
Mandatory
Cascade/XML control connections between SCOPIA
Desktop Server and SCOPIA XT1000.
1025-65535
(configure
within this
range)
TCP
Both
Mandatory
H.323 traffic between the
SCOPIA Desktop Server
and the
SCOPIA XT1000 Series.
To edit this range:
1.
Navigate to C:\Program Files\Radvision\SCOPIA
Desktop\ConfSrv.
2.
Edit the file config.val.
3.
Locate the
[1 system]
section.
At the bottom of that section, add two lines:
2 portFrom = <lowest range limt>
and
2 portTo = <highest range limit>
.
10000-65535
(configure
within this
range)
UDP
Both
Recommended Media connection between the SCOPIA Desktop XT Server
and Client. If not open, the connection will be tunneled
via TCP port 443 and performance will not be optimal.
At full capacity, the SCOPIA XT1009 requires 76 ports.
Limit the range of the of the multimedia ports in the
SCOPIA Desktop XT Server Administrator web interface by
naviagting to Client > Settings tab > Multimedia Ports.
Table 1-18
Ports to and from the SCOPIA Desktop XT Server connected to the public internet
Port Range
Protocol Direction
Severity
Functionality
80
TCP
Incoming
Mandatory
GUI access. The alternative is to configure the GUI to run on
port 443.
443
TCP
Incoming
Mandatory
Control connection between the
SCOPIA Desktop
Client and
SCOPIA Desktop XT Server.
