Adjusting Your Monitor
11
User Controls
1
Exit button:
Use this button to Exit the active menu or the OSD.
2,3 Adjust buttons: These buttons allow you to highlight and adjust
items in the menu.
4 Menu
button: Use this button to open the OSD and activate
a highlighted menu item.
10
Setting up Your Monitor
Werning Messages
If there is something wrong with the input signal, a message appears on the screen or the screen
goes blank although the power indicator LED is still on. The message may indicate that the
monitor is out of scan range or that you need to check the signal cable.
Failure of any of the boxes to appear indicates a problem with your monitor. This box also appears during
normal operation if the video cable becomes disconnected or damaged.
4.
Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after using the previous procedure, check your video controller and
computer system; your monitor is functioning properly.
Environment
The location and the position of the monitor may influence the quality and other features of the monitor.
1.
If there are any woofer speakers near the monitor, unplug and relocate the
woofer to another room.
2.
Remove all electronic devices such as radios, fans, clocks and telephones that
are within 3 feet (one meter) of the monitor.
3.
Degauss the monitor if any devices were removed from the area.
Useful Tips
A monitor recreates visual signals received from the PC. Therefore, if there is trouble with the PC or
the video card, this can cause the monitor to become blank, have poor coloring, noise, Sync. Out of
Range, etc. In this case, first check the source of the problem, and then contact a service center or
your dealer.
Judging the monitor's working condition
If there is no image on the screen or an "Sync. Out of Range" message comes up,
disconnect the cable from the computer while the monitor is still powered on.
If there is a message coming up on the screen or if the screen goes white, this means the
monitor is in working condition.
In this case, check the computer for trouble.
