28
Preparations
1
1 Preparations
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will
change the input source (S23E650K:
Analog
/
HDMI
, S24E650MW:
Analog
/
DVI
). If you power on the product or change the input source by
pressing the [
] button, a message that shows the changed input
source will appear at the top left corner of the screen.
This function is not available for products with an Analog interface
only.
Press the [
] button to automatically adjust the screen settings.
Changing the resolution in Display Properties will activate the
Auto
Adjustment
function.
This function is only available in
Analog
mode.
Turn the screen on or off.
Key Guide
When a control button on the product is pressed, the Key Guide will be displayed
before the onscreen menu opens. (The guide shows the function of the button
pressed.)
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
Icons
Description
AUTO
AUTO
