108
Specifications
10
10 Specifications
10.8 Standard Signal Mode Table
This product can be set to only one resolution for each screen size to obtain the optimum picture
quality due to the nature of the panel. Therefore, a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for the screen size of your product.
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85 Hz, change the vertical frequency to 60 Hz using the CDT
monitor before you exchange it with the LCD monitor.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
Model Name
Synchronization
Resolution
Horizontal
Frequency
Vertical
Frequency
Optimum Resolution
Maximum Resolution
S22E450F
S22E650D
S23E650K
S23E650D
S24E450F
S24E650XL
S24E650PL
S27E650D
S27E650X
30 – 81 kHz
56 – 75 Hz
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
S24E650DW
S24E650MW
S24E650XW
56 – 60 Hz
1920 x 1200 @ 60 Hz
1920 x 1200 @ 60 Hz