Samsung RR39M7 Series, Руководство по обслуживанию

Страница: 67 / 114

67
TROUBLESHOOTING
3) When the Display Panel converts to the Option Setting mode, the entire Display except the Fridge as shown below Temp
LED goes off.
3-1) For example, if you want to shift the standard temp of the Fridge/Freezer compartment by -2°C, follow the steps below.
This function is to change the default temperature and when the default temperature of the RR* is 3°C (RZ* is -19°C)
and the default setting is lowered by -2°C with the Option function, the default temperature will be controlled at RR* is
1°C (RZ* is -21°C).
That is, when changing temperature options, the Fridge/Freezer compartment will operate at RR* : 1°C (RZ* : -21°C)
internally even if it shows 3°C (RZ* is -19°C) on the display panel. Therefore, the temperature will be controlled by -2°C
lower than the set temperature on the display panel.
Note . Basically, when units being shipped out, all the data in the Option function are cleared.
That is, the Default settings are “0”. However, for the purpose of quality improvement during mass production,
the Default values may change. Therefore, be sure to check quality information, such as SVC bulletins.
OPTION VALUE
[External Display] [Internal Display]
OPTION ITEM Control Lock Icon 7-SEG DISPLAY
TEMP SHIFT ON 0