Samsung RR39M7 Series, Руководство по обслуживанию, Страница: 23 / 114

23
PRODUCT SPECIFICATIONS
■ Freezer [North America]
05 02 03 04 01
❶
Temp. / Mode select
press to set the desired temperature.
• In Freezer mode, you can set the temperature between -8℉ and 5℉. (Default temperature is 0℉)
• In Fridge mode, you can set the temperature between 34℉ and 44℉. (Default tamperature is 37℉)
❷
Power Freeze (3 sec)
Power Freeze speeds up the freezing process at maximum fan speed. The freezer keeps running at full speed for 50 hours
and then returns to the previous temperature.
• To activate Power Freeze, press and hold Power Freeze for 3 seconds. The corresponding indicator ( ) lights up, and
the refrigerator will speed up the freezing process for you.
• To deactivate, press and hold Power Freeze for 3 seconds again. The freezer returns to the previous temperature setting.
• To freeze large amounts of food, activate Power Freeze for at least 20 hours before putting food in the freezer.
NOTE
• Using Power Freeze increases power consumption. Make sure you turn it off and return to the previous temperature
if you do not intend to use it.
• To quickly freeze large quantities
❸ Door Alarm
• You can set the alarm for a reminder. If the door is left open for more than 2 minutes, the alarm will sound with the
Alarm indicator blinking.
• You can toggle to enable and disable the alarm by pressing Door Alarm.
❹
Control Lock
• To prevent accidental manipulation, press and hold Control Lock for 3 seconds to activate the Control Lock.
All controls will be disabled with the indicator ( ) on.
• To deactivate, press and hold again for 3 seconds. The controls will be enabled as normal.
❺ Temperature Alarm [Freezer Mode]
• If the freezer temperature is too warm because there has been a power failure, the display blinks as shown in the figure.
• If you tap Temp Key, the "warmest temperature" which has reached in the freezer compartment is flashed on the display
for 5 seconds.
• This warning may occur : When the appliance is turned on for the first time after the installation.
If the freezer is too warm due to a power failure.
• This function is activated on the condition, "Freezer indiacatior is on".