Samsung RR39M7 Series Скачать руководство пользователя страница 20

Страница: 20 / 114

PRODUCT SPECIFICATIONS

■ Freezer

θʪʪіʪθ

ťͱиʪθθʪʪіʪ

طՎƊʪʀظ

øͱʀ̧؏Ƹ̷͝ͱʀ̧

طՎƊʪʀظ

Uͱͱθ̷ɇθ͔

ՋՌ

ՋՍ

ՋՎ

ՋՏ

ՋՐ

❸

Power Freeze

Power Freeze lowers the freezer temperature and speeds up the freezing process. In Power Freeze mode, the freezer runs

at full power for several hours and then returns to normal operation and the previous temperature setting.

• To activate Power Freeze, press and hold Freezer for 3 seconds.The corresponding indicator ( ) lights up, and the

refrigerator speeds up the freezing process for you.

• To deactivate, press and hold Freezer for 3 seconds again.Power Freeze shuts off and the freezer returns to the previous

temperature setting.

• To freeze large amounts of food, activate Power Freeze at least 20 hours before putting food in the freezer.

NOTE

Using Power Freeze increases power consumption. If you do not need the Power Freeze function on, make sure you turn it off so that

the refrigerator can return to normal operation and the previous temperature setting.

❹

Door Alarm

• You can set the alarm for a reminder. If the door is left open for more than 2 minutes, the alarm will sound with the

Alarm indicator blinking.

• You can toggle to enable and disable the alarm by pressing Door Alarm.

❺

Lock/Unlock (3 sec)

• To prevent accidental manipulation, press and hold Control Lock for 3 seconds to activate the Control Lock.

All controls will be disabled with the indicator ( ) on.

• To deactivate, press and hold again for 3 seconds. The controls will be enabled as normal.

Содержание RR39M7 Series



















































































































Результаты поиска

Содержание RR39M7 Series

Отзывы:

Samsung RR39M7 Series, Руководство по обслуживанию, Страница: 20 / 114

Результаты поиска

Содержание RR39M7 Series

Отзывы: