background image

6

Safety precautions

FOR USING

WARNING

Do not touch the circuit breaker with wet hands.

  This may result in electric shock.

Do not strike or pull the product with excessive force.

  This may result in fire, injury, or problems with the product.

Do not place an object near the outdoor unit that allows children to climb onto the machine.

  This may result in children seriously injuring themselves.

Do not turn the product off with the circuit breaker while it is operating.

  Turning the product off and then on again with the circuit breaker may cause a spark and result in electric shock or fire.  

After unpacking the product, keep all packaging materials well out of the reach of children, as packaging materials can 

be dangerous to children.

  If a child places a bag over its head, it may result in suffocation.

Do not insert your fingers or foreign substances into the air inlet/outlet of the product.

  Take special care that children do not injure themselves by inserting their fingers into the product.

Do not use the product as a ventilator for a burner.

  If you use a burner with gas or gasoline, you need to have separate ventilation system for the combustible apparatus.

If any foreign substance such as water has entered the appliance, cut the power by unplugging the power plug and 

turning the circuit breaker off and then contact your nearest service center.                                                                                                        

  Failing to do so may result in electric shock or fire.

Do not attempt to repair, disassemble, or modify the appliance yourself.

  Do not use any fuse (such as cooper, steel wire, etc.)other than the standard fuse.

  Failing to do so may result in electric shock, fire, problems with the product, or injury.

FOR USING

CAUTION

Do not place objects or devices under the indoor unit.

  Water dripping from the indoor unit may result in fire or property damage.

Check that the installation frame of the outdoor unit is not broken at least once a year.

  Failing to do so may result in injury, death or property damage.

Max current is measured according to IEC standard for safety and current is measured according to ISO standard for 

energy efficiency.

RHF050KHEA_IB,IM_E_32885-3.indd   6

2011-10-12   오후 5:30:07

Содержание RHF050KHEA





















































Отзывы: