80
2nd
3rd
Description
Server Network Settings
Connect to Server
Connect to MagicInfo server.
"
If you do use the
TLS
option, the server is configured to use https and data transfer is encrypted. (Port number: 7002)
"
If you don't use the
TLS
option, enter the server IP address and port number. Use 7001 as the port number. (If you are
unable to connect to the server using port number 7001, check with your server administrator to find the correct port
number and then change the port number.)
"
Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to the server using port
number 7001, check with your server administrator to find the correct port number and then change the port number.)
"
For the MagicInfo Server user guide, visit the following website: http://displaysolutions.samsung.com
→
Support
→
Resources
→
MagicInfo Web Manual.
Verify MagicINFO Server
Enable this option to block HTTPS communication if the domain name of the MagicINFO Server URL is different from the
domain name of the MagicINFO Server certificate.
MagicInfo Mode
Select the appropriate
MagicInfo Mode
depending on the environment where you are using the product.
"
Supported content types may be limited while
MagicInfo Mode
is set to
Lite
.
Server Access
Allow or deny access to MagicInfo server.
FTP Mode
Specify the FTP operating mode.
Proxy Server
Set up your proxy server connection and related functions.
"
Address
/
Port
/
ID
and
Password
are enabled only when
Proxy Server
is set to
On
.
UEM Setting
Configure settings for connection to the UEM (Unified Endpoint Management) server.
Enter the required information by following the guide for the server you want to connect to.
You can view or reset the settings using the "UEM Status" menu.
