Minolta A2 Repair Manual Download | Manualshive

Page: 1 / 52

background image

(2720)A 1

REPAIR GUIDE

REPAIR GUIDE

This repair guide section contains the disassembly and adjustment procedures.
For the assembly procedure, follow the reverse procedure.

SYMBOLS

■

:Cautions and keypoints

: Grease
: Adhesive
: Tool

CONTENTS

Page

CONTENTS

Page

Precautions------------------------------------------------- 2
Discharge --------------------------------------------------- 3
1. Disassembly of the exterior parts ------------------ 4
2. Disassembly of the compl PWB TB-3, LCD------ 8
3. Disassembly of the assy cabi front,

compl PWB TB-3/CA-2/TC-1 --------------------- 12

4. Disassembly of the compl PWB SY-1/

ST-1/PW-1/TB-1/SY-2/DM-1 ---------------------- 18

5. Disassembly of the CCD holder assy,

the outer barrel assy and the 1st lens group
moving barrel. --------------------------------------- 22

6. Disassembly of the outer barrel assy ------------- 25
7. Disassembly of the 4th moving barrel assy,

the 3rd moving barrel assy and the 2nd lens
group assy. --------------------------------------------- 27

Arrangement plan of PCB ----------------------------- 29

Required adjustment, setting and confirmation

items after repairing (exchanging parts) -------- 30

Related adjustment and required setting items --- 31
Preparing the 2782 adjustment program ----------- 32
Starting up the 2782 adjustment program

(in the adjustment mode). -------------------------- 33

Contents of the adjustment program and CPU

version readout ---------------------------------------- 34

Setting the camera and the chart when

adjusting the CCD perspective. -------------------- 35

Adjustment of CCD perspective ----------------------- 37
Sensitivity adjustment (GAIN) ----------------------- 39
Adjusting the center part of CCD

(CCD CENTER) --------------------------------------- 40

Adjustment of the frequency for camera shaking

(ACT DRV FREQ) ------------------------------------ 41

Adjustment of the servo for camera shaking

(SERVO GAIN) ---------------------------------------- 41

Adjustment of the gyro for camera shaking

(GYRO OFFSET) ------------------------------------- 42

Adjustment of the shutter (SHUTTER) ------------- 43
Adjustment of the defective pixel

(DEFECT PIXEL) ------------------------------------ 43

Adjustment of the flash GN (FL GNo) -------------- 44
Adjustment of white balance (WB) ------------------- 45
Adjustment of the focus (FCS INF POS) ----------- 46
Adjustment of the manual focus PI (MF PI) ------- 47
Adjustment of the camera shaking compensation

(SHAKE OFFSET) ----------------------------------- 48

DESTINATION Setting (DESTINATION) -------- 49
Setting date and time (TOD) -------------------------- 49
Error code on adjustment program ------------------ 50
Measuring instrument ---------------------------------- 51
Subsidiary Materials ------------------------------------ 52

1
2
3
...
»

Summary of Contents for A2





















































Reviews:

No comments

Related manuals for A2

Brand: Vantrue Pages: 28

Brand: ION Optix Pages: 17

Brand: Planet Pages: 10

Brand: Lamax Electronics Pages: 92

Brand: Koukaam Pages: 23

ALIBI ALI-TP3002L

Brand: Observint Pages: 6

Brand: ALIBI Pages: 5

Brand: Digital Spectrum Pages: 11

Brand: Casio Pages: 143

AgfaPhoto WP8000

Brand: AGFA Pages: 20

Brand: Qvis Pages: 23

Brand: Nextar Pages: 8

Brand: Parkmate Pages: 4

AVerVision SPB370

Brand: Avermedia Pages: 27

Brand: Hama Pages: 244

Brand: Konica Minolta Pages: 53

Brand: nedis Pages: 92

Brand: Medion Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands