background image

English - 1

Setting the PC

  Preset to the 

PC

 mode by pressing the 

SOURCE

 button.

1

  Press the 

MENU

 button to display the menu.

 

Press the ▲ or ▼ button to select 

Picture

, then press the 

ENTER

 button.

 

Select the required option by pressing the ▲ or ▼ button, then 

press the 

ENTER

 button.

4

  When you are satisfied with your setting, press the 

ENTER

 

button.

5

  Press the 

EXIT

 button to exit.

 

Auto Adjustment :

Auto adjustment allows the PC screen of set to self-adjust to 

the incoming PC video signal. 

The values of fine, coarse and position are adjusted 

automatically.

 

Easy Setting

 

1

  Press the 

TOOLS

 button on the remote control.

 

   Press the ▲ or ▼ button to select 

Auto Adjustment

, then 

press the 

ENTER

 button.

 

Screen Adjustment: Coarse

/

Fine

/

Position

/

Image Reset

 

Coarse/Fine

The purpose of picture quality adjustment is to remove or 

reduce picture noise. 

If the noise is not removed by Fine-tuning alone, then adjust 

the frequency as best as possible (coarse) and Fine-tune 

again. 

After the noise has been reduced, re-adjust the picture so that 

it is aligned on the center of screen.

Press the ▲ or ▼ button to select 

Coarse

 or 

Fine

, then 

press the 

ENTER

 button.

  Press the ◄ or ► button to adjust the screen quality, vertical 

stripes may appear or the picture may be blurry. Press the 

ENTER

 button.

 

Position

Adjust the PC’s screen positioning if it does not fit the TV 

screen.

1

  Adjust the position by pressing the ▲/▼/◄/► button.

  Press the 

ENTER

 button.

 

Image Reset

You can replace all image settings with the factory default 

values.

 

Move 

 Enter 

 Return

Coarse 

 

                        50

Fine 

 

                        11

Position                      

Image Reset                    

Screen Adjustment

T V

Auto Adjustment in Progress

Please wait.

Image Reset is completed.

 

Move 

 Enter 

 Exit

Mode 

 

:

 

Standard 

Cell Light   

   

Contrast   

   

 0

Brightness  

   

 45

Sharpness  

       

 50

Auto Adjustment     

Screen Adjustment            

Detailed Settings             

Picture Options             

Reset 

 

: OK 

Picture

T V

 

Move 

 Enter 

 Return

Position

T V

Tools

 (HDMI-CEC)

Picture Mode 

:  Standard

Sound Mode 

:  Custom

Sleep Timer 

:  Off

SRS TS XT 

:  Off

Energy Saving 

:  Off 

Auto Adjustment

Exit

Move

 Enter

BN68-01422D-Eng.indb   31

2008-04-18   오후 1:27:19

Содержание PS50A476P1D




























































Отзывы: