MANUAL SIGNALLING
Keysets can signal each other via a programmable key. This allows one station to alert another without estab-
lishing a voice conversation. Each press of the key results in a 500 milliseconds of ring tone being set to the
intended station. An individual manual signaling key must be programmed for each station to be signaled.
MESSAGE WAITING LIGHT/INDICATION
When calling a digital or IP station and receiving a busy signal or the no answer condition, the caller can leave
a visual indications on the station that the message is waiting. The message button will flash red at the mes-
sage key programmed on the digital or IP phones. A single line phone connected to the built-in single line
ports or the 4SM card will not light the message wait light on the single line device, but will provide an audi-
ble indication by generating a higher frequency dial tone from the single line handset.
MUTE MICROPHONE/HANDSET
Any keyset user can mute the keyset’s handset transmitter by pressing the MUTE key. In addition, keyset users
can also mute the keyset microphone while the keyset is in speakerphone mode.
OFF-HOOK RINGING
When a keyset is in use, the system will provide an off-hook ring signal to indicate that another call is wait-
ing. The ring signal is a single ring repeated. The interval is controlled by a system-wide timer. Single line sta-
tions will receive a tone burst through the handset receiver instead of a ring.
OFF-HOOK VOICE ANNOUNCE (STANDARD)
Keysets may receive a voice announcement while on another call. The calling station must have an OHVA key.
When transferring a call to a busy keyset or while listening to busy signal, the station user can press the OHVA
key to make an OHVA call to the busy keyset. If the called keyset is in the DND mode, it cannot receive OHVA
calls. The software has an user programmable option that will allow the OHVA to be heard through the speak-
er rather than in the handset.
ONE TIME DO NOT DISTURB
The Do Not Disturb (One Time) feature is used to stop all calls to a station when the user is on an outside line
and does not want to be disturbed for the duration of the call. Upon completion of the call, DND is canceled
and the station is returned to normal service. This feature requires a programmed button.
ONE TOUCH DIALING KEYS
Frequently used speed numbers can be assigned to one touch dialing keys for fast accurate dialing.
ON-HOOK DIALING
Any keyset user can originate calls without lifting the handset. When the called party answers, the user may
speak into the microphone or lift the handset for more privacy.
PRIVACY RELEASE
This feature will allow another station to join in on your conversation by temporarily releasing privacy on the
C.O. line from your keyset.
Requires a Privacy Release key to be programmed on your keyset. A maximum of three (3) other people can
join in. This uses one of the conference circuits in the system.
4.35
Содержание OfficeServ 7030
