Trunk Monitor or Service Observing
This feature allows the user who barged-in to retain the trunk call after the original station has hung up.
WARNING:
BARGE-IN WITHOUT TONE MAY VIOLATE STATE OR FEDERAL LAWS CONCERNING THE RIGHT TO
PRIVACY. SAMSUNG TELECOMMUNICATIONS AMERICA IS IN NO WAY RESPONSIBLE FOR THE POSSIBLE MIS-
USE OF THIS FEATURE.
EXTERNAL MUSIC INTERFACES
The OfficeServ 7030 provides one input for connecting to customer provided external music sources. This
source can be used to provide background music, or any of the varied Music On Hold (MOH) uses.
EXTERNAL PAGE INTERFACES
The OfficeServ 7030 provides one external page output and two zone control relays. Common relays are
shared between external page zones and common bell feature.
FLASH KEY OPERATION
While a user is on an outside line, pressing the FLASH key will send a timed disconnect signal to the central
office or PBX. This is used for custom calling features on C.O. lines or in conjunction with CENTREX/PBX oper-
ation. System programming allows individual flash times for C.O. and PBX lines. When C.O. or PBX flash is not
required, setting the timers for two seconds releases the existing call and returns dial tone to make a new call.
FLEXIBLE NUMBERING
System programming allows stations to have three or four digit extension numbers beginning with the digit
2 or 3. Three digit default extension numbers begin with 201 and four digit defaults begin with 2001. Station
group numbers can be three or four digits beginning with the digit 5.
Using digits other than 2, 3 or 5 will require the technician to change other default feature access codes in
the system default numbering plan. User guides may need to be modified as these are all written using the
OfficeServ 7030 default numbering plan.
GROUP BUSY SETTING
This feature provides a busy signal to intercom callers that ring to a station group when all logged-in stations
are busy. The feature is activated in MMC 601 and when set to ON setting, allows an intercom caller to hear a
busy signal when calling a station group. Upon hearing a busy the intercom caller will know that all stations
are busy and can call back. When this option is set to OFF position the intercom caller will hear ring-back tone
when all stations are busy and the call will queue for the next available station. Turning this option ON will
override the Overflow setting when the group is busy. The default setting is OFF.
HOT DESKING (IP KEYSETS)
Hot desking is an industry term that describes stations where multiple people have one or more work areas
or share a common work are. Samsung IP keysets allow users to log in and out from any keyset of the same
model in the system. This allows a user to work from any available desk and retain their phone number, speed
dials, voicemail, and programmed buttons.
HOT LINE
Stations can be programmed to call a pre-defined station or station group whenever that station goes off-
hook. A hot line delay timer of 0–250 seconds can be programmed to allow sufficient time to make a differ-
ent call. This timer is programmable on a per station basis.
4.17
Содержание OfficeServ 7030
