the network. Each Node must be set for either Local Operator or Centralized Operator/Attendant, but not
both.
•
Centralized Voice Mail with Message Waiting Lights: This feature allows one voice mail system to be
shared by all stations in a multi-node network. This feature is only available with the Samsung voice mail
integrated voice mail systems. Users in one Node can call forward their calls to the voice mail system in
another Node. Messages left in the voice mail system will be indicated by lighting the corresponding
voice message button or lamp on any station in any Node of the network. Messages are retrieved by
pressing the VMMSG button or calling the voice mail group number. In addition, display keyset user will
receive softkey options to navigate through the voice mail system. Softkeys include: PLAY, SAVE, DELETE,
PAUSE FAST FORWARD, REVIEW, REPLY, FORWARD, CALL and HELP.
Note: The embedded voicemail of the OfficeServ 7030 should not be used as the main Centralized Auto
Attendant/Voicemail node because of the limited port capacity. The OS 7030 should only be used as the
remote node.
•
DID with Pass Through: Incoming DID, DNIS or DDI calls can be routed through one switch across a net-
work link to be processed by the DID table of the destination switch.
•
Direct Station Selection and Busy Lamp Indication Across the Network: A Network Station key (NS) can
appear on extension “2101” in Node A. It is programmed as “NS2205” representing an extension in Node
B. This NS key will light Red when extension 2205 is on the phone. Station 2101 can press this NS key to
call extension 2205 in Node B. With this feature the CEO can see when the VP in New York is on the phone
or may call him with the press of a button. Any keyset can have multiple NS keys.
•
Do Not Disturb (DND): This feature operates in the same manner as in a non networked switch.
•
Forward External: This feature operates in the same manner as a non networked system with the excep-
tion that, because calls across a network link are trunk calls, network calls do not follow the ICM FWD EXT
ON/OFF setting in MMC 210. It is therefore suggested that this setting be set to ON in a networked switch
to avoid confusion in operation between networked and non networked calls.
•
Group Overflow Across the Network: Calls to a station group in one Node may overflow after a program-
mable time to another station group in another Node.
•
Intercom Calling/Discrete Dialing Plan: Station to station and station to group calls can be made across
the network link without having to dial an access code for a call within the network. LCR can also be pro-
grammed to route calls across a network link and to access local trunks in another networked system.
•
Message Key Across the Network: This feature allows station users to set a message waiting indication
to another station in another Node in the network. Upon receiving a busy or no-answer condition, press
the MSG key or dial the feature code. This will light the message waiting light at the called station. To
return the message press the MSG key with the flashing red LED.
•
Network Page Key: With one or more of these keys users may make page announcements to page zones
in others Nodes in the Network. The network page (NP) key is different than the Page key in a single
node. For example, It is programmed as NP024 where 02 = Node 2 and 4 = page zone 4 in Node 2.
•
Network Time Protocol: Network Time Protocol (NTP) Client is supported feature of the OfficeServ 7000
system. When this system is connected to the network (WAN), the internal clock of the phone system will
update and stay current by polling the network of a National Timer Server. Note:
This feature requires soft-
ware version 4.60 or higher.
•
Network Trunk Ring Destination: This feature allows lines/trunks from the telephone company connect-
ed to one Node to be programmed to ring at a destination (station or station group) in another Node.
•
Remote Hold Across the Network: Calls may be placed on hold at stations in another Node. Then page
that Node and announce that there is a call on holding on extension 2xxx. Anybody in this Node may
pick up the call by dialing 12 + 2xxx. This is useful when one Node does not have a dedicated answering
4.22
Содержание OfficeServ 7030
