Samsung OfficeServ 7000 Series, Руководство системного администратора

Страница: 39 / 46

31
2. Dial the station number (e.g., 205 ) OR
[205] NO ANS FWD
press UP or DOWN key to select the
010 SEC
station and press the right soft key OR OR
press ANS/RLS to select all stations
[ALL] NO ANS FWD
and press the right soft key
010 SEC
3. Press UP or DOWN key to select the
[205] DTMF DUR.
station timer and press the right soft key
0100 MS
→
4. Enter the new value via the dial pad,
[205] DTMF DUR.
e.g., 0300 and the system will return
0100 MS
→
0300
to step 2
5. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a CID or
ANI number received from the Central Office with a name programmed in this
translation table. If there is no match between a received number and a name in
this table, [no CID name] or [no ANI name] will be displayed.
The translation table consists of 1000 entries in the OfficeServ 500 M and
OfficeServ 7100, and OfficeServ 7200 and OfficeServ 7400 systems or 2000
entries in the OfficeServ 500 L system or 500 entries in the OfficeServ 100 sys-
tem with each entry comprised of a ten digit telephone number and a 16 digit
name. See
Program Station Names.
Open customer programming and follow the instructions below.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next MMC.
HOLD - Used to clear previous entry.
System_Administration_Guide.qxp 4/30/2007 12:56 PM Page 38