Samsung OfficeServ 7000 Series, Руководство системного администратора

Страница: 29 / 46

21
PROGRAM PERSONAL SPEED DIAL
NUMBERS FOR OTHER STATIONS
Individual station users can program their own numbers, but in cases where this is
not practical, or for single line telephone users, this program allows a system
administrator to view or change any station’s speed dial numbers. The station
speed dial codes are 00–49 or 000–049. Each station begins with ten numbers
(00–09) and can be assigned more in blocks of ten (up to a maximum of fifty num-
bers).
Each speed dial number consists of a line access code and the telephone number
to be dialed. The access code can be any line group, individual line, station group
or individual extension. The speed dial number can be up to 24 characters long
including
,
, # , FLASH and PAUSE .
NOTE: If Least Cost Routing (LCR) is used, the LCR access code must be entered.
When you are entering a speed dial number, there are some special keys that you
will need to use. These are the bottom row of programmable keys on the LCD 12B
and LCD 24B keysets and are known as keys
A , B , C , D , E and F .
PROGRAM KEYS
UP & DOWN - Scrolls through extension numbers and speed dial bins.
KEYPAD - Used to enter number.
HOLD - Press to clear entry.
A - Does not have a function.
B - Inserts a FLASH.
C - Inserts a PAUSE.
D - Changes the dialing type from pulse to tone.
E - Hides and displays digits.
F - Changes display to speed dial name entry.
DCS KEYSETS [NOT SUPPORTED ON OFFICESERV 7100]
A B C D E F
12 BUTTON KEYSET
PROGRAMMABLE KEYS LAYOUT
A B C D E F
24 BUTTON KEYSET
PROGRAMMABLE KEYS LAYOUT
System_Administration_Guide.qxp 4/30/2007 12:56 PM Page 28