Samsung NY36R9966PS/AA, Руководство пользователя

Страница: 37 / 192

English 37
Elec
tric o
v
en
NOTE
• When steam-cleaning, use exactly 10 oz. of water since this produces the best
results.
• If you press Steam Clean when the oven temperature is above 100 °F, Hot will
appear in the display. Because this function produces the best results when
started while the oven is cool, we recommend that you wait until the oven has
cooled down and
Hot disappears from the display.
After a steam-cleaning cycle
• Take care when opening the door after a steam-cleaning procedure has ended.
The water on the bottom is hot.
• Open the oven door and remove the remaining water with a sponge. Do not
leave the residual water in the oven for any length of time. Wipe the oven
clean and dry with a soft cloth. Do not forget to wipe under the oven door
seal.
• Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the
oven interior. Remove stubborn residue with a nylon scourer. You can remove
lime deposits with a cloth soaked in vinegar.
• If the oven remains dirty, you can repeat the procedure once the oven has
cooled.
• For heavy residue, such as grease left over from roasting, we recommend
that you rub detergent into the residue before activating the steam-cleaning
function.
• After cleaning, leave the oven door ajar at a 15° angle to allow the interior
enamel surface to dry thoroughly.
Steam cleaning
For light cleaning, the Steam-cleaning function saves time and energy. For heavier
duty cleaning, use the self-cleaning function.
To perform the steam cleaning cycle
1. Make sure the oven door is unlocked
and closed completely.
2. Turn the mode and temperature
selector knobs to the
OFF position. Turn
the mode selector knob from OFF to the
Clean position.
3.
Press
<
,
>
to select Steam Cleaning
mode. Press OK to start Steam Cleaning.
4. When the operation is complete, the
display will blink and a beep will sound.
5. Press OFF .
6.
Clean the oven’s interior.
There will be a significant amount of
water remaining on the bottom of the
oven after a steam-cleaning cycle.
Remove the residual water with a
sponge or soft dry cloth.
Mode Selector Knob
Clean Mode
Steam
You can cancel Steam Cleaning at any time by setting the mode selector knob to
the
OFF position.
NY9900R_CHEF_NY36R9966PS_AA_DG68-01105B-00_EN+MES+CFR.indb 37 2019-02-06 1:26:32