English 43
Maint
enanc
e
How to reinstall the door
1.
Firmly grasp both sides of the door at the top.
2.
With the door at the same angle as the removal position, slide the indentations of the hinge
arms into the bottom edges of the hinge slots. The notches in each hinge arm must be fully
inserted into the bottoms of each slot.
Hinge arm
Hinge arm
Bottom edge of slot
Bottom edge of slot
Indentation
Indentation
3.
Open the door fully. If the door will not open fully, the indentations are not inserted
correctly in the bottom edges of each slot.
4.
Push the hinge locks up against the front frame of the oven cavity into the locked position.
Locked position
Unlocked position
Hinge lock
5.
Close the oven door.
How to remove and reinstall the Storage drawer
1.
Slide open the drawer until it stops.
2.
Locate the roller guide clips on either side.
Using both hands, pull down the left clip while
lifting the right clip, and then remove the
drawer.
3.
Clean the drawer in warm, soapy water using
a cloth or soft brush. Then, rinse and dry it
thoroughly.
4.
Put the drawer in the roller guides on either
side, and then snap the clips into place.