26 English
Gas r
ang
e
Gas range
Ignition
1
2
Make sure all surface burners are properly
installed. To light a burner:
1.
Push in the control knob, and then turn
it to the LITE position. You will hear a
“clicking” sound indicating the electronic
ignition system is working properly.
2.
After the surface burner lights, turn
the control knob to shift it out of the
LITE position and turn off the electronic
ignition system.
3.
Turn the control knob to adjust the flame
level.
Manual ignition
If there is a power failure, you can ignite the burner manually. Use caution when doing this.
1.
Hold a long gas grill lighter to the surface burner you want to light.
2.
Push in the control knob for that burner, and then turn it to the LITE position. Turn on the
grill lighter to ignite the burner.
3.
After the burner is lit, turn the control knob to adjust the flame level.
Flame level
The flames on the burners should always stay under the cookware, and should not extend
beyond the cookware bottom at any time.
WARNING
Flames larger than the cookware bottom may result in a fire or physical injury.
NX58J7750S�_AA_AC_DG68-00623A-02_EN.indd 26
2015-06-25 �� 10:15:48
