68 English
Maint
enanc
e
Maintenance
6.
Press the
OFF/CLEAR
button to display the time of the day.
CAUTION
Do not use the surface burners while the gas oven is performing a self-cleaning cycle.
To delay starting the self-cleaning cycle
02
04
04
03
1.
Repeat steps 1 and 2 on the previous page.
2.
Press the
Delay Start
button. The oven door locks.
3.
Set the time you want the oven to start self-cleaning using the number pad.
4.
Press the
START/SET
button. The oven will start self-cleaning at your specified time.
To cancel the self-cleaning cycle
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven.
To turn off the self-cleaning cycle, press the
OFF/CLEAR
button. The cycle turns off, but the
door remains locked and the Lock icon blinks until the oven temperature falls below 392 °F
(200 °C).
After self-cleaning
•
The door stays locked until the internal oven temperature falls below 392 °F.
•
When the oven has cooled down, wipe the oven surfaces with a cloth to remove ash
residue.
•
Stubborn stains can be removed using a steel-wool pad. Lime deposits can be removed
using a vinegar-soaking cloth.
•
If you are not satisfied with the cleaning results, repeat the cycle. “HOT” appears on the
display until the oven cools down. Wait until the message disappears, and start a new
cycle.
•
The cooling fan automatically runs for certain amount of time after self-cleaning.
CAUTION
Do not attempt to open the oven door immediately after the self-cleaning cycle is complete.
The oven is still very hot when the door unlocks. Escaping hot air and/or steam could burn
you.
NX58J7750S�_AA_AC_DG68-00623A-02_EN.indd 68
2015-06-25 �� 10:16:11
