English - 8
Rear oven light
1.
Remove cap by turning anticlockwise and
remove the metal ring, the sheet ring and
clean the glass cap. If necessary, replace
the bulb with a 25 watt, 300 °C heat-
resistant oven light bulb.
2.
Clean the glass cap, the metal ring and the sheet ring if
necessary.
3.
Fit the metal and the sheet ring to the glass cap.
4.
Place glass cap where you have removed it in step 1 and
turn it clockwise to keep it in place.
Oven side light
(Depending on model)
1.
To remove the glass cover,
hold the lower end with
one hand, insert a flat
sharp implement such as
a table knife between the
glass and the frame.
2.
Pop out the cover.
3.
If necessary, replace the halogen bulb with a 25-40 watt,
300 °C heat resistant halogen oven light bulb.
Tip:
Always use a dry cloth when handling a halogen
bulb to prevent sweat from fingers being deposited on
the bulb surface. It increases the life of the bulb when
you exchange the bulb.
4.
Reattach the glass cover.
NV690_HC_DG68-00593C-00_EN.indd 8
2014-05-12 �� 3:22:07
