44 English
Tr
ouble
shoo
ting
Troubleshooting
Troubleshooting
Samsung works hard to ensure that you don’t have problems with your new
electric oven. If you run into unexpected trouble, look first for a solution in the
tables below. If you’re still having trouble after trying the suggested solution, call
Samsung at 1-800-SAMSUNG (1-800-726-7864).
CONTROL DISPLAY
Problem
Possible cause
Solution
The display
goes blank.
A fuse in your home may be
blown or the circuit breaker
tripped.
Replace the fuse or reset the
circuit breaker.
The buttons
cannot be
pressed
properly.
•
There is foreign matter
caught between the
buttons
•
Touch model: There is
moisture on the exterior
•
The lock function is set
•
Remove the foreign
matter and try again.
•
Remove the moisture and
try again.
•
Check whether the lock
function is set.
Changing the oven light
The oven light is a standard 40-watt appliance halogen bulb. It comes on when the
oven door is open. When the oven door is closed, touch
to turn the light on
or off. It will not work during a self-cleaning or Hybrid Cleaning cycle.
01
1.
To change the halogen bulb, you must
tilt the broil heater down. To do this,
turn the circular nut on the support
counterclockwise while holding the
broil heater. The broil heater should
loosen and tilt down.
Important:
The broil heater is not a
removable part. Do not force the broil
heater down. Do not let it drop down.
2.
Remove the glass cover.
3.
Remove the halogen bulb cover.
4.
Replace the halogen bulb.
5.
When done, replace the halogen bulb
cover, replace the glass cover, and then
follow Step 1 above in the reverse
order to return the broiler to its correct
position.
CAUTION
Before changing your oven light, disconnect
the electrical power to the oven at the main
fuse or circuit breaker panel. Make sure the
oven and the halogen bulb are cool.
NV51K6650S_DG68-00855A-00_EN+MES+CFR.indb 44
2016-08-17 11:22:32