background image

66  Users Manual

System Management

Using Power Management Options

Your computer includes 

Power Management

 options that can help the battery charge 

last longer and extend the life of the battery. Power-management options will slow 
down or shut off system components when the components are not being used. 
Power management may slow down system performance. Your computer runs fastest 
with the power cord attached, when power management is disabled.
In the next sections, basic and advanced methods of power management will be 
discussed.

Basic Power Management Schemes

This section discusses the basic schemes of power management when the computer is 
operating on battery power or using AC power.

Standby vs. Hibernation

Hibernation is a state where the contents of memory are stored in a special file 
on the hard disk, and Standby simply keeps a small holding current through 
the memory to keep the data. You are more likely to sustain loss of data in 
Standby mode so it is recommended to save all open files before entering 
Standby. 

Changing Devices:

Do not change PC Cards while in standby or hibernate modes.

To enter the power management window complete the following:
1.

Click 

Start

 > 

Control Panel 

>

 Performance and Maintenance

.

2.

Click 

 icon to display the 

Power Options Properties

 window.

Содержание NP30

































































































































Отзывы: