25
_ induction cooking
INCORRECT
CORRECT
• Unsuitable size for Flexcook zone.
See the “Size of Pans” section. (28 page)
• Two examples of 1 suitably sized pan in the
correct location in the Flexcook zone.
boiL aLert controL (onLy use the LarGest burner)
The Boil Alert function automatically reduces power to a power level you have selected and
sounds a signal.
1
. Touch the
On/Off
control pad of the largest Burner (Right
Front).
2.
Touch the
Boil Alert
pad. The digital display will show .
3.
Touch the +/- pads to select the power level you want the
element set to after the water boils.
The range will automatically reduce the burner’s power level to
this level after the water boils and sound a signal (6 times).
• If you want to adjust the power level while Boil Alert is in operation,
touch the
Boil Alert
pad again and set the power level.
• Required amount of water : 2 ~ 12 cups (500 ml ~ 3000 ml)
Please note that the power level control pads (+/-, Boost, Simmer) become disabled once you enter
into Boil Alert operation. Please refer to the above text for instructions on how to change power levels.
The length of time it takes for the Boil Alert beep to go off from full boil mode will vary. Factors
that determine beep activation timing are cookware diameter, water amount in the cookware,
the flatness of the cookware bottom surface (the flatter, the better) and iron content of cookware.
Boil Alert function is only applicable to water boiling (mixing with other ingredients diminishes the
effectiveness of the feature, so we recommend you to use power level control pads when cooking pasta etc.)
Since the Boil Alert only works on the 11” element, we recommend you use cookware that
is at least 7.5” in surface diameter to experience the full benefit of Boil Alert.
(IB_Premium)NE599N1PBSR_AC_DG68-00426A_EN.indd 25
2012-04-25 �� 7:37:10