Samsung MXD-K025AN, Руководство по установке, Страница: 9 / 40

8
Control-KIT Installation
1) Drill 4 holes on the correct position of the wall and fix the Control-KIT securely.
(refer to the dimension of figure below.)
2) Open the box and connect the cables according to the diagram.
( Wires should be pulled through the Cable-nut, before connecting to the terminal.
Refer to the figure below.)
3) Fix the cable firmly with Cable-tie after connecting.
4) Close the box.
INSTALLATION
3 8 N C
RY75
RY76
RY77
1 8 N C
1(L) 1(N)
External Controller
(MIM-B14)
Main PBA
Terminal Block
1 2 3 4 1 2 3 4 1 2 3 4
Cable-tie
Cable-nut
• Make sure that Control-KIT should be installed within short distance from the EEV-KIT.
- Supplied sensor in the Accessory box is 10 m.
- 2.5/5.0HP EEV wire is 2 m
- 7.5/10.0HP EEV wire is 7 m
• Close the box with the cover and cable-nut securely so that Control-KIT is fireproofed.
• Avoid installing the unit in a location exposed to direct sunlight or rain.
286
280 300
380
ø4.5
(Unit : mm)
NASA PJT_AHU Kit_MXD-K@@@AN Series_EN_03711A(1).indd 8 2013-01-11 오후 3:20:24