5
EN
G
LIS
H
1.
Push the two hooks at the bottom of your Wired Remote Controller at the same time, and then pull up the front cover to
separate it from the rear cover.
❋
Push the two hooks at the same time.
•
Insert a flat head screwdriver into the square groove in the upper area of the hook
to disassemble it easily.
NOTE
2.
Arrange the power cable and the communication cable so that they fit in the housing along the edges of the rear cover.
If you need more space for the wiring
work, you can take it off.
15cm(5.90)
<When the cable is not concealed>
<When the cable is concealed>
10cm(3.93)
DVM Hydro Unit_MWR-WW00_IM_EN_03647A(1).indd 5
2013-01-09 오후 2:48:40
