Samsung MultiXpress M4370 Series Скачать руководство пользователя страница 408

Страница: 408 / 423

4. Troubleshooting

2) Paper detecting error & Skew error

•

Symptom

When original paper size is A4 or Letter, system is detected as legal.

NOTE

If the user select the continue button at the UI screen, the print can continue under this error status condition.

If the rear side of DSDF is so much lift up, Skew error also can be occurred.

•

Cause

The rear side of DSDF is not closed fully due to high force of hinge spring.

So, APS sensor can’t detect original paper size.

•

Troubleshooting

It is need to exchange the Hinge Assembly with improved one.

Improved hinge applied for mass production from Oct.2014

Hinge-left and Hinge-right have to be replaced together.

After exchanged the new hinge, it is need to check the scan margin.

If scan margin need to adjust, please make progress auto adjustment job for scan margin and shading test also
need to conduct.

1) Remove 8 screws. Then, disassemble the old hinge assembly from the DSDF unit.

2) Exchange the hinge assembly with new improved hinge.

4-230

Содержание MultiXpress M4370 Series

















































































































































































































































































































































































































Результаты поиска

Содержание MultiXpress M4370 Series

Отзывы:

Похожие инструкции для MultiXpress M4370 Series

Бренды по названию

Популярные бренды

Samsung MultiXpress M4370 Series, Руководство по обслуживанию

Результаты поиска

Содержание MultiXpress M4370 Series

Отзывы:

Похожие инструкции для MultiXpress M4370 Series

Бренды по названию

Популярные бренды