Samsung Mobile WiMAX Outdoor RAS SPI-2331 Скачать руководство пользователя страница 84

Страница: 84 / 96

Mobile WiMAX Outdoor RAS SPI-2331 System Description/Ed.02

4-27

4.5 Operation and Maintenance Message Flow

An operator can check and change the status of the outdoor SPI-2331 by means of the

management system. To this end, the outdoor SPI-2331 provides the SNMP agent function.

The function enables the WSM operator to perform the operation and maintenance function

of the outdoor SPI-2331 at remote site by using the SNMP.

In addition, the operator can perform Web-EMT based maintenance function by using a

Web browser in a console terminal or IMISH based maintenance function by using the SSH

connection. However, grow/degrow, paging information change and neighbor list change

functions are only available on WSM.

The statistical information provided by the outdoor SPI-2331 are provided to the operator

according to collection period and the real-time monitoring function for a specific

statistical item specified by the operator is, also, provided.

Operation and Maintenance Message Flow

The operation and maintenance of the outdoor SPI-2331 is carried out via the SNMP

get/get_next/get_bulk/set/trap message between the SNMP agent on the main OAM and the

SNMP manager of the WSM. The outdoor SPI-2331 deals with various operation and

maintenance messages received from the SNMP manager of the management system,

transfers the results and reports the events, such as failure generation or status change, in

real time as applicable.

The statistical information is provided as statistical file format in unit of BI and the

collection period can be specified as one of 15, 30 and 60 minutes.

Содержание Mobile WiMAX Outdoor RAS SPI-2331

































































































Результаты поиска

Содержание Mobile WiMAX Outdoor RAS SPI-2331

Отзывы:

Похожие инструкции для Mobile WiMAX Outdoor RAS SPI-2331

Бренды по названию

Популярные бренды

Samsung Mobile WiMAX Outdoor RAS SPI-2331, Описание системы

Результаты поиска

Содержание Mobile WiMAX Outdoor RAS SPI-2331

Отзывы:

Похожие инструкции для Mobile WiMAX Outdoor RAS SPI-2331

Бренды по названию

Популярные бренды