Samsung ML-3561N Series, Руководство по обслуживанию

Страница: 108 / 156

Troubleshooting
Service Manual
7-11
Samsung Electronics
7.2.7 Multi-Feeding
• Description Multiple sheets of paper are fed at once.
Check and Cause Solution
1. Check the Guide side L/R or Guide Rear in the
Cassette, if the position is correct.
2. Solenoid malfunction(the solenoid does not work
properly): Perform EDC Mode.
3. Pad-Friction is contaminated with foreign matter.(oil...)
4. The face of paper is blended.
1. Replace the solenoid if necessary.
2. Replace the Main PBA.
3. Clean the pad friction with soft cloth dampened with
IPA(Isopropyl Alcohol).
4. Use the smooth paper.
7.2.8 Paper rolled in the fuser
• Description If contaminated at intervals of 57mm on the back of a paper.
Check and Cause Solution
1. Contamination of the pressure roller or heat
roller (Background, Hot off set).
2. Check the claw of the fuser whether it is
deformed.
1. After disassembling the fuser, clean contami-
nation between the heat roller and the ther-
mostor and remove the contamination of the
pressure roller.
2. If there is heavy background, repair it by the
background troubleshooting method.
3. Clean the surface of the heat roller with IPA or
water
4. Check the warp or separation of the print claw
and the holder plate claw, and then manage it.