7
ENGLISH
3.
Ƹϑʪϩиͱͱθ͔ͱθʪϑʀθʪиϑϩͱѣуϩ˵ʪɵɇʀ̧ʀͱЭʪθϩͱϩ˵ʪиɇ̷̷ࢋAͱ͝͝ʪʀϩϩ˵ʪΧͱиʪθʀɇɵ̷ʪϑ࣍ǤߢࡡǤߣ࣎ɇ͝ʒ
communication cables (F1, F2) to the terminals on the back of the front cover while adjusting to a suitable
length.
4.
Ǯ˵ʪ͝ʀͱ͝͝ʪʀϩ̈͝˝ϩ˵ʪΧͱиʪθʀɇɵ̷ʪϑϩͱǤߢɇ͝ʒǤߣࡡ˙ɇϑϩʪ͝ϩ˵ʪťA9ϩʪθ͔̈͝ɇ̷ϑʀθʪиϑ࣍AĘߦ࣎ϩͱɇϩͱθαЇʪͱ˙ߧ
Ęࡔʀ͔ͱθ̷ʪϑϑࢋ
Ɗʀθʪиϑ̈іʪࡠđߤईуईߧ
• You can connect up to 16 indoor units to a Wi-Fi Kit.
ߣ
Ǥߣ Ǥߤ
ߤ
ߥ ߦ
庢
庥
度
ⓐ
庤
庣
10 (0.4)
and over
10 (0.4) and over
50 (2) and over
10 (0.4) and over
Screw
holes
࢘
Be sure to secure space of at least
10 mm (0.4 inch) (up/right/left)
and 50 mm (2 inch) (down)
around the back cover before
ѣӱ͝˝ϩ˵ʪɵɇʀ̧ʀͱЭʪθͱ͝ϩ˵ʪиɇ̷̷ࢋ
࢘
Fix the screws to the
screw holes.
࢘
Do not over-tighten the PCB
terminal.
ǤߢǤߣߢߣ
Wi-Fi Kit
PCB port
Indoor unit
[Unit : mm (inch)]
Back over
Item
Contents
Item
Contents
庡
Power/communication terminals
庤
LED
庢
Tracking/Reset button
庥
Ęʪϩиͱθ̧ť9
庣
Micro SD card slot
度
Interface module PBA
5. Assemble the Wi-Fi Kit again.
•
Ã͝ϑʪθϩϩ˵ʪ˙θͱ͝ϩʀͱЭʪθϩͱϩ˵ʪЇΧΧʪθ˝θͱͱЭʪϑɇϑϑ˵ͱӥ͝͝ϩ˵ʪѣ˝Їθʪࢋ˙ϩʪθɇϑϑʪ͔ɵ̷цࡡ͔ɇ̧ʪ
sure that there is no gap between the covers.
NOTE
NOTE
ki]_TXX\Z[hTWWpiptuhzhGvjmG~TmGrG⯜◼ⷴᷱj}luUGGG^
YWYXTXWTYWGGG㝘㤸GXWaYZa\W