Samsung MIM-H05UN, Руководство пользователя и инструкция по установке

Страница: 17 / 28

17
ENGLISH
LED display during tracking
॰
If communication is normal but there are only the indoor units with the central control disabled.
• Reset the central control option on the indoor units. When the central control is disabled, the indoor
units cannot be controlled with the Wi-Fi kit.
ťͱиʪθøkU
Wi-Fi connection LED Wi-Fi setting LED Time Status
Blinking Blinking Off About 10 seconds Tracking
Off On (Green) Off
Alternating every 10
seconds
Only the units with the
central control disabled
On On (Yellow) Off
Blinking Blinking Off About 10 seconds Tracking
• Setting the option code for the Wi-Fi Kit
- After installing the Wi-Fi Kit on the indoor unit, be sure to change the central control option (SEG5)
as follows.
- Set the option code to [0D2051] as shown below.
Function Page Mode
Option mode to
change
Tens position of the
option SEG
Units position of the
option SEG
ĘʪиЭɇ̷Їʪ
Indicator on
the remote
control
Indication
and details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0 D Option mode 2
Tens position
of SEG
0
Units position
of SEG
5
ĘʪиЭɇ̷Їʪ
1
॰
If no indoor unit is tracked
• Check whether the communication cables between indoor units and the Wi-Fi Kit are connected
properly.
ťͱиʪθøkU
Wi-Fi connection LED Wi-Fi setting LED Time Status
Blinking Blinking Off About 10 seconds Tracking
Blinking Off Off About 10 seconds
ĘͱЇ̈͝ϩϩθɇʀ̧ʪʒࢋĘʪʪʒϩͱ
check communication
Blinking Blinking Off About 10 seconds Tracking
Initializing the user data
• To initialize the user data on a Wi-Fi Kit, press the (SW3) button inside the Wi-Fi Kit for 5 seconds. All the
indicators illuminate and the user data is deleted.
ki]_TXX\Z[hTWW†pipt†uhzhGvjmG~TmGr›G⯜◼ⷴᷱ†j}†lu†U•‹‹GGGX^ YWYXTXWTYWGGG㝘㤸GXWaYZa\Y