15
Step-by-step installation guide
B. ATTACH THE MOUNTING PLATE TO
THE WALL
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to a
wall stud.
1
. Remove the toggle wings from the bolts.
2
. Insert the bolts into the mounting plate through
the holes designated to go into drywall, and then
reattach the toggle wings so that ¾˝ of the bolt
protrudes beyond the wing.
INSTALLATION OVERVIEW
A
. Prepare Rear Wall (horizontal duct only)
B
. Attach Mounting Plate to Wall
C
. Prepare Top Cabinet
D
. Mount the Microwave Oven
E
. Connecting Ductwork (vertical duct only)
A. PREPARING THE REAR WALL FOR
OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for outside
exhaust.
CL
• Read the instructions for outside back exhaust on the
REAR WALL TEMPLATE.
• Tape the REAR WALL TEMPLATE to the rear wall.
• Cut the opening, following the instructions on the
REAR WALL TEMPLATE.
CAUTION:
Do not cut an opening in the rear wall if you
are installing the microwave with vertical duct or non-
vented ductless ventilation.
3. INSTALLATION
SMH1927_XAC_DE68-04108B-06_EN+CFR.indb 15
SMH1927_XAC_DE68-04108B-06_EN+CFR.indb 15
2022-01-20 �� 10:19:11
2022-01-20 �� 10:19:11
