2. Microwave Oven Installation Requirements (continued)
- 8 -
Connecting the Power Cables to the Oven
Install the power cable clamp required for the battery connection to the connection power cable.
Do not connect the power cable to the battery yet.
Bring the power cable close to the oven.
Remove two nuts attached to the power connector on the rear of the oven.
Connect each ring terminal end of the power cable wire to the bolt of power connector on the oven.
Be careful not to damage the wire.
Tighten each ring terminal end with the nut.
Be sure to attach the positive power cable (B) to the red right insulating terminal on the oven.
Be sure to attach the negative power cable (Battery -) to the black left terminal.
Connect the positive power cable (B) to the battery first. Then, connect the negative power cable
(Battery -) to the battery.
In case of uninstalling the power cable, do it in exactly reverse order.
Battery Power Consumption for
proper operation
Microwave oven will operate continuously for a
maximum of 30 minutes off the battery.
The battery life is subject to various conditions such
as battery operating hours, battery charging status,
ambient temperature, etc.
(Figure)
Power Cable Size: 22mm (4AWG)
Wire Total Length : MAX. 3m
Red color
Black color
+
+
-
Battery Capacity 24V 45Ah
(Figure)
+
Battery-
Содержание MAGNETRON DE6612-D
