4. Operation
Setting Cooking Times
This following procedure explains how to cook or reheat
food. Always check your cooking settings before leaving
the oven unattended.
1. Once connected to the power supply the display on your
oven will show : 8888.
2. Unlock
by keeping the door’ s lock to the right.
3. Open the door.
The oven light will turn on.
4. Put the food into a suitable container, place it in the
center of the oven and then close the door securely. The
oven light will go off.
5. Set the power level by turning the Cooking Power Control
Knob as required. (Maximum power : 500W)
The display on your oven will show the required power
level for a moment. (For setting in 500W,
)
6. Set the cooking time by turning the Time Dial, and then
cooking start automatically after about three seconds.
The oven light and cooling fan will come on. Heating will
start. The time on the digital display will count down.
NOTE
Press the Start (
)+30s button if you want to
operate the oven before automatically.
Whenever the oven is operating, cooking time is
increased by turning to the right and decreased by
turning to the left.
You can change the power level by turning the
Cooking Power Control Knob during heating.
If you close it after opening the door during heating,
the oven will not operate. Press the Start (
)+30s
button for operating the oven.
7. When time has elapsed, the Beep Tone will sound 3
times and all heating will stop. The oven light will go off.
8. Open the door and take the food out.
9. Close the door. The oven light will go off.
10.Lock the door by keeping the door’ s lock to the left.
NOTE
The oven light and all numbers in the display
automatically turn off after 5 minutes to conserve
battery power.
Setting time cannot exceed the maximum of 30
minutes.
WARNING
Be sure to lock the door by keeping it to the left for
the sake of safety except that the oven is operating.
Important Remark
Voltage supply of the microwave oven is limited to
protect the safety of product and vehicle
1. If the battery voltage goes below 21V when
operating the oven or 21.5V when the oven is
idle, the oven beeps 6 times and "Lo" blinks on
the display.
2. If the battery voltage is low, you can check to see
if it has returned to normal by pressing the
Cancel button. If a blinking period (.) appears, the
voltage has returned to normal and you can use
the oven again.
3. If the battery voltage goes above 28.5V when
operating the oven or 29.5V when the oven is
idle, the oven beeps 6 times and "HI" blinks on
the display.
4. If the battery voltage is high, you can check to
see if it has returned to normal by pressing the
Cancel button. If a blinking period (.) appears, the
voltage has returned to normal and you can use
the oven again.
Power Levels
You can choose between the power levels below.
NOTE
If you select the higher power level, the
cooking time must be decreased.
If you select the lower power level, the cooking
time must be increased.
When you set the cooking time by turning Time Dial.
NOTE
If you want to add the cooking time by turning
Time Dial, turn to the right
(Increasing time : 10 sec.).
Power Level
Output
HIGH
MEDIUM HIGH
MEDIUM
DEFROST(
)
500W
350W
250W
150W
Time
Increasing time
Up to 1 min.
1 -3 min.
3 -10 min.
10 -20 min.
20 -30 min.
5 sec. unit
10 sec. unit
30 sec. unit
1 min. unit
2 min. unit
Содержание MAGNETRON DE6612-D
